Modify Selection
- Research methods and measures:
- Measurement methods
- or
- Triaxial tests
- or
- Photometry
- or
- Radiometry
- or
- Training and curriculum measurement
- or
- Physiological work measurement
- or
- Audiograms
- or
- Laboratory measurement
- or
- Monitoring
- or
- Environmental monitoring
- or
- Mine monitoring
- or
- Equipment monitoring
- or
- Atmospheric monitoring
- or
- Personal monitoring
- or
- Seismic monitoring
- or
- Seismic methods
- or
- Weatherability tests
- or
- Surveys
- or
- Interviews
- or
- Questionnaires
- or
- Focus groups
- or
- Anthropometry
- or
- Human stress measurement
- or
- Sampling
- or
- Work sampling
- or
- Field measurement
- or
- Tensile tests
- or
- Axial tests
- or
- Shear tests
- or
- Electromyography
- or
- Point load tests
- or
- Uniaxial compressive tests
- or
- Continuous measurement
- or
- Compliance measurement
- or
- Time motion studies
- or
- In situ rock strength measurement
- Document types:
- Reports of Investigations
Home Links
Results 21 - 30 of 34
-
1/1/1992 - Reports of InvestigationsThe U.S. Bureau of Mines established a wire rope research laboratory to examine the factors that affect the life of wire rope. The tests indicated that once a wire rope nears the end of its service life, both deterioration and the consequent loss of ro...
-
1/1/1992 - Reports of InvestigationsThis report presents a Bureau of Mines study to identify the causes of self-heating events beneath the floor of a deep underground coal mine. The combined results led to the conclusion that pyrite oxidation was the prime cause of the heatings.
-
1/1/1992 - Reports of InvestigationsStability analyses of fractured and faulted rock masses require delineation of the position, extent, and orientation of geologic discontinuities. Recommendations are made for increasing the accuracy of locations of microseismic events detected.
-
1/1/1992 - Reports of InvestigationsThe purpose of this U.S. Bureau of Mines study was to assess the ability of trainees to don an unfamiliar self-contained self-rescuer (SCSR) after having become familiar with how to put on a different type of apparatus.
-
1/1/1991 - Reports of InvestigationsThis report presents the procedures used and findings from a U.S. Bureau of Mines evaluation of the self-contained self-rescuer (SCSR) donning proficiency of 243 miners at eight Eastern underground coal mines.
-
1/1/1988 - Reports of InvestigationsThe Bureau of Mines has developed a system using a high-speed electropneumatic mechanism for the rapid (grab) sampling of dusts and gases during an explosion to monitor pyrolysis-charring in coal particles and combustion of pyrolysis vapors.
-
11/1/1981 - Reports of InvestigationsThis report discusses the configuration and system deployment for the postdisaster surface seismic system for detecting and locating trapped miners.
-
1/1/1978 - Reports of InvestigationsTests were conducted to study shelf life of evacuated vacutainer samplers prior to sampling and also to check the stability of sampled gases prior to analysis.
-
1/1/1978 - Reports of InvestigationsIn this Bureau of Mines investigation, production was monitored for 1 year at over 30 coalbed gas-drainage boreholes located in Alabama, Pennsylvania, and West Virginia.
-
1/1/1976 - Reports of InvestigationsA seismic system which utilizes in-mine geophones to detect trapped miners has been developed. Tests at the Bureau of Mines safety research mine at Bruceton, Pennsylvania, and at two operating mines indicate such a system has a maximum detection range i...
Home Links
Content source: National Institute for Occupational Safety and Health, Mining Program